|
Trolley Attachments |
||||
| Numerous
trolley attachments are available for various applications. Attachment selection
should be based on careful study of the handling method with specific attention
to loading and unloading. |
||||
|
AG-25010
Eye Bolt |
||||
| The
AG-25010 eyebolt is perhaps the most popular and versatile trolley attachment.
The AG-25010 is rated for 250lbs and is supplied with zinc plating. The eyebolt
should be used in conjunction with the AG-2506 pendulum yoke or the number
AG-803 pendant. |
||||
AG-2506
Pendulum Yoke |
||||
| The
AG-2506 pendulum yoke can be mounted as a rigid or pendulum-type attachment,
when trolley clip bolts are attached in holes “A” & “C”, the yoke is
rigid. When a clip bolt is inserted in hole “A” only, it facilitates a
“pendulum action” This pendulum movement is particularly useful in systems
with elevation changes where it is desirable for load to remain perpendicular to
the floor. |
||||
 Clevis Bar |
||||
| The
AG101 Clevis Bar, When used in conjunction with the standard short side plate
trolley, forms a configuration completely interchangeable with the old style
long side plate trolley. |
||||
| This
attachment should be used when the AG806, AG8012, or AG80-3 attachments are
utilized. |
||||
It
will be noted that the AG806 and AG803 attachments are made with protruding ears
or flanges at the top, along with two mounting holes. When the attachments are
assembled with the Clevis bolt inserted in the top hole, the ears provide a
rigid connection by being in contact with the trolley clevis bars.. When
Assembled in the bottom hole, the ears are not in contact and therefore, permit
the attachment to pivot on the clevis bolt (for use on systems that have
vertical bends and dips) thereby conveying the work or work carriers on a plane
parallel to the floor at inclines or declines. |
||||
| Revolving
Carrier |
||||
| The
AG8015 revolving carrier is primarily used in spray booth and power wash
applications. Because it is constructed of stainless steel, the carrier is not
affected by chemical cleaning or high temperatures. When used in conjunction
with the AG80151 carrier rack, positive rotation is assured. This unit rotates
one revolution for every 8-3/8” of linear travel. |
||||
| Carrier Rack | ||||
| The
AG80151 gear rack comes in lengths of 6’-0”. Racking can be installed to
swing away for applications where load rotation is not desired. |
||||
| Because
of numerous variables, mounting hardware is not furnished as a standard. |
||||
Revolving
Carrier |
||||
| The AG8012 revolving carrier is very similar to the AG8015 carrier, with the exception of the method of rotation. Carrier can be rotated manually or by a flat friction bar mounted parallel to cableway track. Carrier rotates one revolution for every 6” of linear travel (assuming positive traction on friction bar). | ||||
|
Cableway Conveyor Menu Anatomy |
